IE PRO 200: Tetra IoT Agent Technical Specifications
Hardware Specifications
Hardware Item | Value |
---|---|
CPU | 528MHz ARM Cortex-A7 |
RTC | 1 Built-in Real-Time Clock |
Memory | 512MB DDR2 SDRAM 4GB NAND Flash |
SD Format | TF Card |
GPS | Optional |
Wireless | Wi-Fi/4G |
Ethernet | 2 x 10/100M |
I/O Port | 2 x RS-485 1 x RS-232 2 x USB 2.0 1 x CAN 2.0 1 x DI 1 x DO |
Electrical Specifications
Electrical Item | Value |
---|---|
Rated Power Voltage | DC12V, DC24V |
Rated Power Consumption | 8W |
ESD Immunity | Contact discharge: ±4 KV Air discharge: 8 KV |
Operating Voltage | 9~36 V |
Allowable Momentary Power Interruption | 10 ms (at 12 V DC) |
Operating Conditions
Condition | Value |
---|---|
Relative Humidity | 5%~95% no condensation, no freezing |
Operating Temperature | -40°C~85°C |
Corrosion Immunity | Atmosphere free from corrosive gases |
Shock Resistance | 10~25 Hz (X Y Z Direction 2G 30 Minutes) |
Software Specifications
Item | Description |
---|---|
OS | Debian Jersey |
Kernel | Linux Kernel 4.0 |
Python | 2.7 |
Protection and Installation
Item | Description |
---|---|
Degree of Protection | IP51 |
Installation Mode | DIN |
Size | 135×105×38(mm) |
Weight | 600g |
Network Specifications
URL | Port | Protocol | Description |
---|---|---|---|
iot.<TDP domain> | 8883 | TCP | MQTT+TLS |
iot.<TDP domain> us.pool.ntp.org * north-america.pool.ntp.org | 123 | UDP | NTP servers for time synchronization; at least one URL should be allowed. |
iot.<TDP domain>
is the service endpoint for the IoT server.
MQTT
The Tetra IoT Agent uses MQTT+TLS as the main communication protocol. Communication includes this information:
- Data collected from devices/sensors specified in the driver and configuration file
- System metrics of the Tetra IoT Agent: MAC address, and IP address for WAN and Wi-Fi, SSID,
- BSSID, and signal strength and quality for Wi-Fi
- New configuration file from the Cloud
- Firmware update to the Cloud
Connection Ports and Hardware Views
Tetra IoT Agent - Back View
Port Name | Description |
---|---|
WiFi_Antenna_1 | Female screw for an external Wi-Fi antenna connection |
WiFi_Antenna_2 | Female screw for an external Wi-Fi antenna connection |
LAN | RJ-45 port for local configuration and instrument connection |
USB_2.0 | USB 2.0 port for sensor/instrument connection |
WAN | RJ-45 port for Ethernet connection |
Power | For DC 24V power connection |
Power_LED | If powered, then light is on |
Warning_LED | If there is something wrong in the software, then light is on. For normal operating conditions, light is off. |
Running_LED | If the software is running normally, then light blinks at a steady rate. |
Network_LED | If the link is connected to the AnyLink Cloud server, then the light blinks at a steady rate. |
Tetra IoT Agent - Serial Number Label
Updated 11 months ago