Tetra IoT Technical Specifications (NeuroQ)
This section contains the Tetra IoT Agent technical information. In this section, you'll find hardware and network specifications.
A diagram of the hardware appears below.
Resetting
Hold Reset for 5 seconds - resets IP address LAN to default
Hold Reset for 20 seconds - resets all configurations (besides default SSH password) to default
Hardware Specifications
The following are the NeuroQ Specifications for:
- Core
- Interface
- Mechanical
- Power Consumption
- Wifi
- Environment
- LED Light
Core
Component | Specifications |
---|---|
CPU | Qualcomm MDM9607 (ARMv7) |
Memory | 128MB |
Storage | 8GB |
Interface
Component | Specifications | Count |
---|---|---|
Ethernet | 100Mbps, LAN/WAN | 2 |
USB A | USB2.0 TypeA,650mAOutput | 2 |
485 | 3.81mmTerminal block,15KV ESD | 2 |
232 | 3.81mmTerminal block,15KV ESD | 1 |
GPIO | 0~20mA/0~5V,3.81mmTerminal block, 15KV ESD | 2 |
ADC | 4~20mA,3.81mmTerminal block, 15KV ESD | 2 |
Remote | Button | 1 |
Reset | Pin-hold button | 1 |
Antenna | 4G/LTE:SMA x 2、WLAN: RP-SMA x 1 | N/A |
Power | DC9-36V | N/A |
Mechanical
Component | Specifications |
---|---|
Size (mm) | 118Hx93Wx28D |
Install | Rack/Magnet/Stand |
Enclosure | Metal |
Protection | IP51 |
Cooling | Fanless |
Power Consumption
Component | Specifications |
---|---|
Power Consumption | 200mA-220mA@12V |
Wi-Fi
Component | Specifications |
---|---|
Transmit Power | 14.5dBm @802.11a/6Mbps 12.5dBm @802.11a/54Mbps 17.5dBm @802.11b/1Mbps 17.0dBm @802.11b/11Mbps 16.5dBm @802.11g/6Mbps 15.0dBm @802.11g/54Mbps 15.5dBm @802.11n/HT20 MCS0 15.0dBm @802.11n/HT40 MCS0 14.5dBm @802.11n/HT20 MCS7 13.0dBm @802.11n/HT40 MCS7 13.5dBm @802.11ac/VHT20 MCS0 12.0dBm @802.11ac/VHT40 MCS0 11.5dBm @802.11ac/VHT20 MCS7 10.5dBm @802.11ac/VHT40 MCS9 11.5dBm @802.11ac/VHT80 MCS0 10.5dBm @802.11ac/VHT80 MCS9 |
Environment
Component | Specifications |
---|---|
Humidity | 5 ~ 95% (No condensation) |
Storage Temperature | -40 ~ 125°C |
Work Temperature | -40~ 85°C(-40~ 75°Cwith 5GHz WiFi module) |
LED Light
Component | Specifications |
---|---|
PWR | Power indicator |
ERR | Error indicator |
RUN | Run indicator |
NET | Network indicator |
Network Specifications
The following lists the network specifications. Note that <TDP domain> is the Tetra Data Platform endpoint you log into (for example: platform.yourorganization.com).
URL | Port | Protocol | Description |
---|---|---|---|
iot.<TDP domain> | 8883 | TCP | MQTT+TLS (Outbound firewall rule from IoT Agent (Client) side) |
iot.<TDP domain> us.pool.ntp.org * north-america.pool.ntp.org | 123 | UDP | NTP servers for time synchronization; at least one NTP URL should be allowed; if on LAB LAN, an internal time-server needs to be configured in IoT Agent local settings to allow for automatic time sync upon Agent reboot. |
MQTT
The Tetra IoT Agent uses MQTT+TLS as the main communication protocol. Communication includes this information:
- Data collected from devices/sensors specified in the driver and configuration file
- System metrics of the Tetra IoT Agent: MAC address, and IP address for WAN and Wi-Fi, SSID,
- BSSID, and signal strength and quality for Wi-Fi
- New configuration file from the Cloud
- Firmware update to the Cloud
Updated 10 months ago