Tetra IoT Technical Specifications (NeuroQ)
This section contains the Tetra IoT Agent technical information. In this section, you'll find hardware and network specifications.
A diagram of the hardware appears below.
NeuroQ IoT Box
Resetting
Hold Reset for 5 seconds - resets IP address LAN to default
Hold Reset for 20 seconds - resets all configurations (besides default SSH password) to default
Hardware Specifications
The following are the NeuroQ Specifications for:
- Core
- Interface
- Mechanical
- Power Consumption
- Wifi
- Environment
- LED Light
Core
| Component | Specifications |
|---|---|
| CPU | Qualcomm MDM9607 (ARMv7) |
| Memory | 128MB |
| Storage | 8GB |
Interface
| Component | Specifications | Count |
|---|---|---|
| Ethernet | 100Mbps, LAN/WAN | 2 |
| USB A | USB2.0 TypeA,650mAOutput | 2 |
| 485 | 3.81mmTerminal block,15KV ESD | 2 |
| 232 | 3.81mmTerminal block,15KV ESD | 1 |
| GPIO | 0~20mA/0~5V,3.81mmTerminal block, 15KV ESD | 2 |
| ADC | 4~20mA,3.81mmTerminal block, 15KV ESD | 2 |
| Remote | Button | 1 |
| Reset | Pin-hold button | 1 |
| Antenna | 4G/LTE：SMA x 2、WLAN: RP-SMA x 1 | N/A |
| Power | DC9-36V | N/A |
Mechanical
| Component | Specifications |
|---|---|
| Size (mm) | 118Hx93Wx28D |
| Install | Rack/Magnet/Stand |
| Enclosure | Metal |
| Protection | IP51 |
| Cooling | Fanless |
Power Consumption
| Component | Specifications |
|---|---|
| Power Consumption | 200mA-220mA@12V |
Wi-Fi
| Component | Specifications |
|---|---|
| Transmit Power | 14.5dBm @802.11a/6Mbps 12.5dBm @802.11a/54Mbps 17.5dBm @802.11b/1Mbps 17.0dBm @802.11b/11Mbps 16.5dBm @802.11g/6Mbps 15.0dBm @802.11g/54Mbps 15.5dBm @802.11n/HT20 MCS0 15.0dBm @802.11n/HT40 MCS0 14.5dBm @802.11n/HT20 MCS7 13.0dBm @802.11n/HT40 MCS7 13.5dBm @802.11ac/VHT20 MCS0 12.0dBm @802.11ac/VHT40 MCS0 11.5dBm @802.11ac/VHT20 MCS7 10.5dBm @802.11ac/VHT40 MCS9 11.5dBm @802.11ac/VHT80 MCS0 10.5dBm @802.11ac/VHT80 MCS9 |
Environment
| Component | Specifications |
|---|---|
| Humidity | 5 ~ 95% (No condensation) |
| Storage Temperature | -40 ~ 125°C |
| Work Temperature | -40~ 85°C(-40~ 75°Cwith 5GHz WiFi module) |
LED Light
| Component | Specifications |
|---|---|
| PWR | Power indicator |
| ERR | Error indicator |
| RUN | Run indicator |
| NET | Network indicator |
Network Specifications
The following lists the network specifications. Note that <TDP domain> is the Tetra Data Platform endpoint you log into (for example: platform.yourorganization.com).
| URL | Port | Protocol | Description |
|---|---|---|---|
| iot.<TDP domain> | 8883 | TCP | MQTT+TLS (Outbound firewall rule from IoT Agent (Client) side) |
| iot.<TDP domain> us.pool.ntp.org * north-america.pool.ntp.org | 123 | UDP | NTP servers for time synchronization; at least one NTP URL should be allowed; if on LAB LAN, an internal time-server needs to be configured in IoT Agent local settings to allow for automatic time sync upon Agent reboot. |
MQTT
The Tetra IoT Agent uses MQTT+TLS as the main communication protocol. Communication includes this information:
- Data collected from devices/sensors specified in the driver and configuration file
- System metrics of the Tetra IoT Agent: MAC address, and IP address for WAN and Wi-Fi, SSID,
- BSSID, and signal strength and quality for Wi-Fi
- New configuration file from the Cloud
- Firmware update to the Cloud
Documentation Feedback
Do you have questions about our documentation or suggestions for how we can improve it? Start a discussion in TetraConnect Hub. For access, see Access the TetraConnect Hub.
NOTE
Feedback isn't part of the official TetraScience product documentation. TetraScience doesn't warrant or make any guarantees about the feedback provided, including its accuracy, relevance, or reliability. All feedback is subject to the terms set forth in the TetraConnect Hub Community Guidelines.
Updated 2 days ago